Smart Badge is a BLE tag in the form of a holder, allowing you to turn any standard ISO ID card into a powerful one by simply sliding the card inside the badge.
- Equipped with an IR receiver signal that doesn’t penetrate the walls allowing for room-level granular accuracy.
- Equipped with two call buttons (red and blue) that can be programmed to trigger a notification when pressed.
To turn a Smart Badge on or off, press and hold the red button for 5 seconds.
When a Smart Badge is on and a button is pressed and released, the button's LED will blink for 5 seconds. When you see the LED blink, it's your confirmation the badge is on.
Smart Badge may be off when it arrives from Kontakt.io.
|Physical Specification||LED||Device status information & alerting|
LIS2DH/LIS3DH accelerometer (motion and orientation detection)
|Range||Up to 98 feet (30 meters)|
|Battery life||3 years with IR active, 5 years with 1 Hz beaconing|
|Battery Life||3 years with IR active, 5 years 1 Hz beaconing|
|Environmental Requirements||Operating Temperature||32°F to 131°F (0°C to 55°C)|
|Operation Humidity||10% to 90% non-condensing|
|Battery/Main Operating Modes||Over-the-Air beacon update/Cloud management
IR scanning for room level tracing
Environmental sensing - temperature