Skip to content

Placeholder

Introducing Portal Beam

The Portal Beam is a wireless, BLE, cloud-based sensor platform quantifying rooms and delivering building insights in real-time. Portal Beam uses nine different sensors: thermal camera, temperature, humidity, air quality, light, smoke detection, infrared beaconing, RSSI fingerprinting, and iBeacon.

The Portal Beam comes with an 8-core CPU with neural network architecture and Bluetooth 5.0 readiness. Out of the box, it's compatible and seamlessly talks to any BLE-gateway. Using the 1-click, self-onboarding workflows of the Kio Cloud you can get started with it in minutes.

Key features

  • Mains powered Mode Only
  • Configure with Kio Gateway Installer app
  • RGB LEDs signalling device state
  • Beacon broadcasting
  • IR beaconing for room level tracing
  • Environmental sensors (humidity, temperature, atmospheric pressure, air quality)
  • Occupancy sensing
  • Visual/sound alerts

Technical Specifications

Dimensions and weight Height 7.8 in (19.8 cm)
Width 7.8 in (19.9 cn)
Depth 1.8 in (4.6 cm)
Electronics Microcontroller nRF52832
IR Beam (4-directional LEDs)
Six environmental sensors
Buzzer (optional)
Far-Infrared wide-angle thermal camera
Connectivity Bluetooth Bluetooth Low Energy 5.0
Range up to 165 feet (50 meters)
Environmental Sensors Temperature Operating range: -40°C to 85°C
Typical accuracy: +/- 1°C
Relative Humidity Operating range: 0-100%
Typical accuracy: 20-80% RH, 25°C
Air Quality Index Range: 0 - 255
Value calculated based on multiple sensor readings
Pressure Operating range: 300-1100 hPa
Typical accuracy: 0.6 hPa
Carbon Monoxide (CO) Operating range: 1-1000 ppm
Light Operating range: 1-100%
Power Input Voltage DC 6V-24V barrel type terminal
Batteries 6x ER14505 (15.6 Ah), DC 3.6V)
Environmental Requirements Operation Temperature -40°C to 85°C (-40°F to 185°F)
Operation Humidity 10% to 90% non-condensing
Physical Specification Dedicated mounting plate
Reset button (factory reset)
RGB LED status indicator (information & alerting)